Publicité
Les langues disponibles
Les langues disponibles
in good condition. A properly maintained compressor is less likely to break down or cause
accidents.
•
Never direct the air jet towards people, animals or towards your own body.
EN
•
Always wear safety glasses to protect your eyes from objects that could be projected by the
air stream.
•
Never direct the jet of liquid sprayed by the tools connected to the compressor towards it.
•
When servicing the compressor, only the spare parts or accessories recommended by the
manufacturer should be used. Follow the instructions in the maintenance section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions may result
in a risk of electrical shock or
•
Do not alter or misuse the compressor. This equipment was built with precision. Any
alteration or modification not specified is a misuse and can lead to dangerous situations.
•
Never leave the compressor exposed to adverse weather conditions such as rain, fog, snow
or intense sun.
•
Repair of the compressor must be carried out only by qualified personnel. Repair or
maintenance performed by an unqualified person may create a risk of injury.
•
Do not manipulate, drill or weld the tank. In case of defects or rust, contact our technical
services.
DESCRIPTION OF THE ELEMENTS.
OPERATING PRINCIPLES.
To compress the air, the piston moves up and down inside the cylinder. In the down stroke, the
air is contracted through the inlet valve. The discharge valve remains closed. In the upward stroke
of the piston, the air is compressed. The inlet valve closes and the compressed air is forced to be
directed towards the tank through the non-return valve.
1
Pressure switch with ON/OFF switch.
2
Pressure regulator.
3
Pressure gauge.
4
Oil inlet plug.
5
Oil level viewer.
6
Air filter.
7
Deposit.
8
Security valve.
9
Engine cover.
26
Publicité
