KTM Power Parts 61005099000 Instructions D'installation page 6

1
6
Scope of supply:
1x Common rail
2x Main silencer
2x Main silencer clamp
2x Carbon clamp
2x Short exhaust spring with rubber
1x Fastening kit SD
Mounting
– Remove seat
– Remove left and right upper tail section
– Remove M8x25 [1] main silencer fastening screws on the left and right
– Remove the exhaust clamp [2]
– Pull the main silencer towards the back and remove
2
– Remove the rubber exhaust attachment [3]
– Mount the common rail (M8x25 screws) and the exhaust clamp on the
3
– Do not tighten the screws yet
– Mount the fastening kit [4] on the left and right side (apply Loctite
4
– Do not tighten the screws yet
left and right
243 to the screws)