Publicité
Les langues disponibles
Les langues disponibles
AP mode only
Network topology
Security
Client/Bridge mode only
Network topology
Security
Mesh mode only (supported only with type 1 radio card)
Network topology
Security
Power supply
Coding serie A:
24V
, 48V
nom
nom,
96V
110V
nom,
nom,
Coding serie P:
PoE ++
Electrical connection
requirement
Wi-Fi interface
Number of interfaces
Radio mode
Modulation rates
Frequency range for
802.11a/n/ac/ax
Frequency range for
802.11b/g/n/ax
Antenna plugs
(Antennas not provided)
72V
nom,
DC
Infrastructure
WEP, WPA-PSK/WPA (2/3) -PSK,
WPA/ WPA (2/3) with 802.1x
authenticator, SSID visibility status
Infrastructure, ad-hoc modes
WEP, WPA (2/3)-PSK, 802.1x
supplicant. AES/TKIP/WEP by hardware
encryption
802.11s
SAE/AMPE
Wide range dual input power supply,
from 24V to 110VDC according to all
EN50155 nominal voltages, polarity
protection; 4-pole M12 plug A coding,
Power supply requirement 30W.
These products must be powered by a
PoE (802.3bt type 3) power source
connected to LAN2
The circuit breaker must have a nominal
current In compatible with the needed
RailBox power (twice larger)
Also, the circuit breaker must have a
supported inrush current of 10xIn
1 or 2
Support for IEEE 802.11a/h, 802.11b,
802.11g, 802.11n, 802.11ac and
802.11ax
802.11ax : up to 4.804 Gbps
802.11ac Wave 1 : up to 1.733 Gbps
802.11ac Wave 2 : up to 1.3 Gbps
802.11n : up to 600 Mbps
802.11a/h : 6 to 54 Mbps
802.11g : 1 to 54 Mbps
802.11b : 1 to 11 Mbps
5 GHz; 5.150 to 5.875 GHz
2.4 GHz; 2.412 to 2.484 GHz
QMA-type female antenna plugs
WiFi 4 or WiFi 5 Wave 1:
1 radio: 3 connectors (1,2,3)
2 radios: 6 connectors (1,2,3,6,7,8)
WiFi 5 Wave 2 or WiFi 6:
1 radio : 4 connectors (1,2,3,4)
2 radios : 8 connectors (1,2,3,4,5,6,7,8)
-
-
15
Publicité
