Publicité
Les langues disponibles
Les langues disponibles
The product has 8 LEDs to indicate the status of the product.
LED
Power 1
Power 2
Diag
Red/ Green
LAN 1
Green/ Yellow
LAN 2
C-KEY
WiFi1
Green/ Blue/
WiFi2
LEDs definition
Color
This LED is ON when a power supply is
connected to pins PWR1 of the power
Green
connector or a POE++ source is connected to
LAN2
This LED is ON when a power supply is
Green
connected to pins PWR2 of the power
connector
This led indicates the unit operational state.
OFF:
Red:
Red for more 120s: hardware failure
Green:
Blinking: Firmware in flash is loading
Yellow:
Green:
On:
Flashing: Tx/Rx activity
Off:
Off:
Red:
Red/
Green
Green:
Blinking: during reads and writes to the C-
Off:
Blinking green: The product is unassociated
Solid green:
Red
Blinking blue: Radio Tx/Rx activity
Blinking red:
Solid red:
Description
Power supply is off
Initialization during 60s after power
is applied then goes Green
Ready to use
Device is in "emergency mode"
because firmware is corrupted. Re
load firmware with WaveManager
connected in 2500 Base-T
10 or 100 or 1000 Base-T
Link on LAN established
Link on LAN broken
C-KEY in factory state
The C-KEY is not detected; data is
invalid or corrupt
The C-KEY data is valid
KEY
The radio is disabled
The product is associated
WiFi in CAC DFS state
WiFi in NOP DFS state
-
-
11
Publicité
