Publicité
TABLE OF CONTENTS
1. Safety and warnings
2. Usage
3. Set up and installation
4. Operation
5. Maintenance and defects
6. Technical data
7. Parts
8. Assembly instructions
9. Declaration of conformity
1. Safety and warnings
This table complies with the prescribed safety regulations. Inappropriate use may cause damage to persons and table.
Please read the operation manual prior to start using the table. It provides you with important information about safety, use,
installation and maintenance of the table, and thus protecting you and your children and avoiding damage on the table.
Please guard this operation manual and pass it on to any future owner!
2. Usage
The electromotive, height-adjustable tables are designed for workstations in dry work environments only (0-40°C; 20-90% relative
humidity). The table height is infinitely adjustable, so that it can be set to the most ergonomically suitable working level:
•
They have not been designed for other purposes than those included in this manual, e.g. they are not to be used in areas of high
humidity or dampness, nor for lifting people. Any other use is at one's own risk!
•
Do not crawl, lie or move around under the table frame, and do not sit or stand on the table frame.
•
CHILDREN should only use the table when supervised by adults.
•
Liability - The manufacturer accepts under no circumstances warranty claims or liability claims for damages arising from
improper use or handling of the table frame other than that described in this operation manual.
3. Set up and installation
•
When the table has been assembled (see assembly instructions in CHAPTER 8) the adjustable feet are installed so that the table
is level and does not shift. Then the table is connected to the 100-240 VAC outlet and the table is ready for use.
•
Make sure that no cables can get jammed.
•
Place the table in a safe distance from window frames, radiators, furniture etc. so that people do not get stuck.
•
Do not place any objects above 21" (55 cm) underneath the table.
•
When moving the table after it has been assembled, the tabletop needs to be removed. The table CANNOT be lifted by the
tabletop. The desk need to be lowered to minimum height before moving.
4. Operation
UP/DOWN operation:
Push the buttons for operation up or down
WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS AND
WARNINGS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY.
IMPORTANT NOTES!
Prior to installment, use and
maintenance of the table frame, any
installer and any user of the table must
study this assembly and operation
manual carefully, so as to gain a
complete understanding of its contents
2
Publicité
