Caratec Vision CAV190B Notice D'utilisation page 62

5. Main Menu
Column
Satellite
Transponder
satellite settings (3rd column)
NOTE Please follow the instructions at the bottom of the screen.
You can obtain current information on satellite and transponder
NOTE
settings from the appropriate service provider or on websites
such as www.lyngsat.com or www.flysat.com.
5.3. Picture Menu
1. Call up the Main Menu by pressing the MENU button (control
panel on the television set or remote control).
2. Select Picture and confirm with the OK button.
> Menu Picture is displayed.
Important functions in the Picture Menu:
> Customising picture settings.
NOTE Customising picture settings is only possible in Personal Mode.
Function
Picture Mode
Contrast
Brightness
Colour
Tint
Sharpness
62
Explanation
Satellite list. The satellite settings can be edited (green button). It is also
possible to delete satellites (red button) and to add satellites (yellow
button).
List of the transponders corresponding to the selected satelliten
(„Satellite" column). The transponder settings can be edited (green
button). It is also possible to delete transponders (red button) and to
add transponders (yellow button).
List of the settings for the selected satellite ("Satellite" column).
Configure the DiSEqC function to guide a compatible satellite antenna.
Explanation
 Standard (pre-selected settings)
 Mild (pre-selected settings)
 Personal (settings can be adjusted manually)
 Dynamic (pre-selected settings)
Setting contrast
Setting brightness
Setting colour ratio
Setting tint (NTSC only)
Setting picture sharpness
PICTURE