Caratec Vision CAV190B Notice D'utilisation page 52

4. Quick Set-Up
4.1. Electrical Connection
1. Connect the television set to a suitable power supply.
4.2. Turning the television set on
1. Turn on the television set using the on/off switch and press the POWER
button on the remote control or on the device.
> The standby lamp turns green when the television is switched on.
> The standby lamp turns red when the television is switched off.
> The standby lamp is not illuminated when the on/off switch is in the OFF
position.
4.3. Set-Up for Satellite Reception
1. Connect the satellite dish to the DVB-S2 inlet of the television set.
2. Turn on the television set with the on/off switch and press the POWER
button on the remote control or on the device.
> The First Time Installation Menu is automatically displayed the first time
you switch on.
Language
Country
Energy Mode
3. Select menu Language and Country.
4. Press OK.
> The Tuning Setup Menu is displayed.
52
First Time Installation
< English
< Germany
< Home Mode
Auto Tuning
OK
>
>
>