Key Automation EGKTB1 Instructions Et Avertissements Pour L'installation Et L'usage page 13

6.2 – DELETION OF ALL CODES
The operation deletes all user codes including the master code that will return to the preset value.
The number of digits of which the codes are made of is not changed. The combinations of all devices
remain unchanged.
DESCRIPTION
Start the procedure by pressing and holding simultaneously
the keys and until the lighting on the keyboard turns
blue
Type the master code (unless it has already been changed)
Type the sequence
7 – RESTORING FACTORY CONFIGURATIONS
7.1 - DELETING KEYBOARD PAIRING
DESCRIPTION
Press and hold the P key on the keyboard until the colour
turns RED
Release the P button and resume it until the colour turns
GREEN
After deleting the pairing, the keyboard is no longer able to communicate with the decoder.
7.2 - ERASING THE MEMORY OF A DECODER
The procedure deletes all matches in the decoder memory, all user codes, and restores the four-digit
and 1234 master code.
DESCRIPTION
Press and hold the key until THE RED LED lights up,
release the button
Press the button again until the colour of the LED turns
GREEN and release it.
7 – DISPOSAL
Packaging components (cardboard, plastic, etc.), properly separated, must be placed in the
appropriate bins. The components of the device such as electronic boards, metal parts, batteries, etc.,
must be separated and recycled. For disposal methods, the rules in force at the place of installation
must be applied.
DO NOT DISPERSE IN THE ENVIRONMENT!
EXAMPLE COLOUR
+ 5
BLUE
sec.
max
ORANGE
1234
GREEN
EXAMPLE COLOUR
RED
GREEN
EXAMPLE
BEEP
> 1 s
+ > 1s
+ > 1s
BEEP
> 1 s
COLOUR
RED
GREEN
13