Worx JAWHORSE WX060.1 Mode D'emploi page 7

SAFETY INSTRUCTIONS
WARNING! When using this product
basic safety precautions should always
be followed. Failure to follow all instructions
listed below may result in personal injury.
Read all these instructions before attempting
to operate this product and save these
instructions.
1. Keep work area clear and well lit.
- Cluttered areas and benches invite
injuries.
2. Make sure all moving parts are free
from interference.
3. Ensure JAWHORSE
level ground in a stable manner.
4. Keep other persons away
- Do not let persons, especially children,
not involved in the work touch the tool and
keep them away from the work area.
5. Be aware of over-balancing. When a
large piece is cut from one end of a job,
the remaining piece may be heavy enough
to tip the JAWHORSE
workpiece is well supported.
6. Check to make sure that all fixing
screws and knobs are tight and all
legs are locked into place before
operating the JAWHORSE
7. The tool must be used only for its
prescribed purpose. Any use other than
those mentioned in these instructions will
be considered a case of misuse.
The manufacturer shall not be liable for
any damage or injury resulting from such
cases of misuse.
8. Never stand on this product.
9. Dress properly
- Do not wear loose clothing or jewelry,
they can be caught in moving parts.
- Non-skid footwear is recommended
when working outdoors.
- Wear protective hair covering to contain
long hair.
10. Use personal protective equipment
- Use safety glasses.
- Use face or dust mask if working
operations create dust.
Portable versatile workstation
All manuals and user guides at all-guides.com
is set up on firm,
®
. Always ensure the
®
.
®
11. Save all warnings and instructions
for future reference. Refer to them
frequently and use them to instruct others
who may use JAWHORSE
someone JAWHORSE
instructions also to prevent misuse of the
product and possible injury.
12. Do not use tools in damp or wet
locations. Moist work piece and
environment can not clamp firmly.
13. Ensure the work piece was clamped
firmly and the lock release switch is
on proper state before use.
14. Check damaged parts. Before further
use of tool, it should be carefully checked
to determine that it will operate properly
and perform its intended function.
15. When not in use, tools should be
stored in a dry locked-up place, out
of the reach of children and do not
allow persons unfamiliar with it.
16. Have your JAWHORSE
qualified repair person.
17. WARNING
- The use of any accessory or attachment
other than one recommended in this
instruction manual may present a risk of
personal injury.
. If you loan
®
, loan them these
®
serviced by a
®
EN
7