Braun BC24 Mode D'emploi page 2

English
Battery precautions
1. Do not use rechargeable batteries.
2. Use only alkaline AA batteries of the same or equivalent type.
3. Insert batteries with the correct polarity.
4. Keep batteries away from children.
5. Dispose of exhausted batteries according to local legal re-
quirements. Do not dispose them by throwing away with normal
household rubbish.
6. Avoid short circuiting the contacts in the battery compartment
and battery terminals.
7. Remove batteries from the unit if it will not be used for long
period of time.
8. Exhausted batteries should be removed from the battery com-
partment to prevent over-discharge, which can cause leakage
and may cause damage to the clock.
Getting started
1. Remove the battery door.
2. Insert 1x AA size new battery as indicated in the battery com-
partment and press the RESET key to reset the clock. The display
will turn on after a few seconds. Only use alkaline batteries from a
reputable brand.
3. Close the battery door.
Function keys
TIME SETTING touch key.
- Touch the clock icon to turn on the backlight for 10 seconds.
- Touch the clock icon to stop the alarm and activate the 5 minute
snooze function.
- Touch and hold the clock icon for 2 seconds to set the clock time.
ALARM SETTING touch key.
- Touch the alarm icon to turn on the backlight for 10 seconds.
- Touch the alarm icon to stop the alarm and activate the 5 minute
snooze function.
- Touch and hold the alarm icon for 2 seconds to set the alarm
time.
SNOOZE / LIGHT touch key.
- Touch to turn on the backlight for 10 seconds.
- Touch to stop the alarm and activate the 5 minute snooze func-
tion.
Rotating bezel
- In normal mode, rotate the bezel to turn on the backlight for 10
seconds.
- Rotate the bezel to stop the alarm and activate the 5 minute
snooze function.
- In TIME SETTING or ALARM SETTING mode, rotate the bezel
clockwise to increase the setting value.
- In TIME SETTING or ALARM SETTING mode, rotate the bezel
anti-clockwise to decrease the setting value.
ALARM ON / OFF slider
- Push the ALARM ON / OFF slider up to enable the alarm.
- Push the ALARM ON / OFF slider down to disable the alarm.
RESET key
- Press by using a pointy object (a paperclip for example) to reset
all values to default. Reset the unit in case of a malfunction.
Product description (Image 1)
1. ALARM SETTING touch key
2. LCD display
3. SNOOZE / LIGHT touch key
4. Rotating bezel
5. TIME SETTING touch key
6. ALARM ON / OFF slider
7. RESET button
8. Battery compartment
Display details (Image 2)
A. Time
B. Alarm icon
C. Alarm time
Setting the time
1. Touch and hold the clock icon for 2 seconds to enter the time
setting mode.
2. Rotate the bezel to select 12 or 24 hour format.
3. Touch the clock icon to confirm hour format setting.
4. Rotate the bezel to set the desired time.
5. Touch the clock icon to save the settings and return to the
normal display.
Setting the alarm
1. Touch and hold the alarm icon for 2 seconds to enter the alarm
setting mode.
2. Rotate the bezel to set the desired alarm time.
3. Touch the alarm icon to save the settings and return to the
normal display.
Using the alarm and snooze function
1. Enable the alarm by pushing the ALARM ON / OFF slider up (so
the green indicator is visible). The bell icon will appear on the LCD
display.
2. Touch one of the keys (SNOOZE/LIGHT / TIME SETTING /
ALARM SETTING / BRAUN logo) or rotate the bezel to stop the
alarm and activate the snooze function. When the snooze func-
tion is activated, the bell icon will flash.
3. To disable the alarm and snooze function, push the ALARM ON /
OFF slider down. The bell icon will disappear.
Note: When the snooze function is activated, the alarm will auto-
matically start again after 5 minutes. The snooze function will not
stop unless the ALARM ON / OFF SLIDER is pushed down.
Battery replacement
When the LCD starts to dim, replace with a new battery at once.
Note: Exposure to an electrostatic environment may cause the
clock to reset. In this event, please follow the instructions as
described in this manual to set the clock again.