Télécharger Imprimer la page

Kalorik WCL 47492 S Mode D'emploi page 9

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
OPERATION
CAUTION: Before connecting the appliance to an electrical power supply, let it
stand for about 4 hours. This will reduce the possibility of malfunctioning in the
cooling system due to transport handling.
Before use, clean the appliance thoroughly, especially inside the cavity (See
"Cleaning").
Rearrange the shelves in the cavity properly if they are not correctly placed.
Make sure that the voltage in your home is compatible with the appliance.
Position the appliance in a cool place, on a stable surface near a wall outlet,
with sufficient clearance (5 in / 12 cm) on all sides to allow proper ventilation.
Avoid moist and humid spaces to store or use appliance.
WARNING: Do not store or install the appliance outdoors
WARNING: Do not attempt to install the appliance into a built-in unit!
Plug in the appliance into a grounded wall outlet.
Once connected to a power source, the beverage center will start cooling.
NOTE: The inside temperature of the beverage center depends on the exterior
room temperature. To reach the minimum temperatures indicated below, the
appliance should be located indoors in a room in which the ambient
temperature is less than 90°F/32°C.
Temperature settings applicable when storing mostly one type of wine:
Red Wines
White / Rose / Dry Wines
Sparkling Wines
www.KALORIK.com
58°F - 64°F
48°F - 58°F
45°F - 48°F
9
14°C – 18°C
9°C – 14°C
7°C – 9°C
WCL 47492 S - 200605

Publicité

loading