Publicité
Les langues disponibles
Les langues disponibles
3. Insert back wheel (B) into back of frame
by depressing push pin and sliding into
the back receptacle, making sure the
wheels face outwards from the frame.
The push pin will snap into place when
secure. Repeat for the second back
wheel. (Figure 3)
4. Unfold the I-Walker by pressing down
on both sides of the seat frame.
(Figure 4)
5. Insert the handles (C) into the handle
receptacles. Press in the red buttons
located on the back of the I-Walker
and slide the handles into the frame to
secure the handles in place. (Figure 5)
Rev.1.07.21.14
All manuals and user guides at all-guides.com
B
Figure 3
Figure 4
C
Figure 5
Publicité
