Publicité
Les langues disponibles
Les langues disponibles
FITTING ACCESSORIES
Hood:
The hood can be fitted to the gun nozzle to protect the nozzle end.
Extension nozzle:
Insert the accessory by pushing it into the
fixed section of the gun and aligning the
groove in the spout with the line on the
gun.
Then
rotate
the
nozzle
90
degrees
B
(CLOCKWISE) in the direction of the arrow
(B). In this way the accessory will remain
fixed in place in the locked position.
With this accessory it is possible to obtain fast cleaning in corners normally
harbouring the most stubborn dirt, such as hobs, where thanks to the steam you
can remove every trace of grease, naturally and without the use of detergents.
Round coloured brushes:
These accessories, when fitted to the extenc c
sion nozzle or the gun nozzle help to flake
off the most stubborn cakedcon dirt, such as
around the burners of a hob.
They can be used to clean sanitary ware,
sinks, grills, showers and baths, eliminatc c
ing every trace of limescale. The different
colours allow them to be used in different
situations.
23
Publicité
