Inateck FE2011 Manuel D'instructions page 3

All manuals and user guides at all-guides.com
How to Use
1. Open the enclosure by removing the screws from either
side of the bottom piece of the enclosure and slide the
drive tray.
2. Connect the hard drive to the SATA connectors.
3. Slide the drive tray back into the enclosure and insert the
removed screws using the screwdriver provided.
4. With the enclosure fully assembled, connect the USB
3.0 cable from the enclosure to a USB port on the host
computer system using the included cable.
Screw
Screw
Screw
Screw
2