Jeulin 472 031 Mode D'emploi page 5

®
VTT method
Ammeter sensor 0/20 mA - 0/50 mA
Ref :
472 031
ENGLISH
2.6 Zeroing
A zero drift can be compensated as follows:
- Connect the sensor onto the console.
- Set the selector switch on 20 mA.
- Power up the VTT console.
- Locate the trim pot access hole on the sensor front.
- Use the screwdriver supplied with the console to adjust the trim pot until the
±
console display reads 0
3 Technical data
Measuring range
- 20mA range:
- 50mA range:
Resolution :
- 20mA range:
- 50mA range:
Accuracy
- 20mA range:
- 50mA range:
Bandwidth:
Ω
Input resistance: 9.1
Protection level
Identification code:
- 20 mA range:
- 50 mA range:
4 After-Sales Service
This material is under a two year warranty and should be returned to our
stores in the event of any defects.
For any repairs, adjustments or spare parts, please contact:
JEULIN - TECHNICAL SUPPORT
27 019 EVREUX CEDEX FRANCE
4
0.02 mA.
0 to 20 mA
0 to 50 mA
20µA
50µA
±
1% 40µA
±
1% 100µA
0 to 14kHz
500 mA by resettable fuse
30
31
Rue Jacques Monod
BP 1900
+33 (0) 2 32 29 40 50