DeLOCK 11481 Mode D'emploi page 2

English
Description
This KVM switch by Delock is a convenient solution for connecting two computers with HDMI output to one HDMI
monitor.
Note
KVMs emulate a standard wired 104 key keyboard and wired generic 2 or 3 button scroll wheel mouse on their respective
console ports. Whether or not a wireless or gaming mouse and keyboard work with KVM switches depends on several
factors; in general, most wireless mice and keyboards do not support working with KVM switches. We recommend to use
a standard wired mouse and keyboard with our KVM switches.
Specification
• Connectors:
Input:
2 x HDMI-A female
2 x USB 3.0 Type-B female
4 x 3.5 mm 3 pin stereo jack female (audio)
1 x 3.5 mm 3 pin stereo jack female for optional IR-receiver
1 x DC 5 V power connector screwable
Output:
1 x HDMI-A female
2 x USB 3.0 Type-A female (USB 3.0 Hub)
2 x USB 2.0 Type-A female (keyboard + mouse)
4 x 3.5 mm 3 pin stereo jack female (audio)
• Switching via button, mouse button, hotkey or infrared remote control
• Automatic switching when turning a PC on or off
• Supports HDCP 1.4 and 2.2
• Supports HDR
• HDMI output: Resolution up to 3840 x 2160 @ 60 Hz (depending on the system and the connected hardware)
• Robust metal housing
• Colour: black
• Dimensions (LxWxH): ca. 178 x 75 x 26 mm
System requirements
• PC with HDMI female + USB Type-A female
• Monitor or TV with HDMI connector
• Connection cables
Package content
• KVM switch with USB and audio
• Remote control
• 2 x cable USB 3.0 A male to USB 3.0 B male, length ca. 1.0 m
• External power supply
• Mounting brackets and screws
• User manual
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
Hardware Installation
Connect a USB keyboard and mouse to the console ports of the KVM.
Connect all audio cables to each computer, the KVM, and speakers if necessary.
Connect other USB devices to the USB 3.0 Hub if necessary.
Connect the HDMI monitor to the HDMI output of the KVM.
Connect the included DC 5V power adapter to the DC port of the KVM.
Connect the HDMI cable between the HDMI output of the computer and the HDMI input of the KVM.
Connect the USB 3.0 cable to the USB-A port of the computer and to the USB-B upstream port of the KVM.
Now press the power button.
Turn on the computer and make sure that the USB ports are enabled and working properly.
All manuals and user guides at all-guides.com
-2-