TREVIDEA G3 Ferrari G20128 Manuel De L'utilisateur page 10

GENERAL INFORMATION
Before using for the first time, carefully wash all the parts
that will come in touch with food such as the container.
Never leave the appliance unattended while it is running.
Don't immerse appliance in water or liquids. In any case,
avoid splashing of water or liquids.
Put the appliance on stable shelves and floors.
Do not operate without coffee or with more than 50g of
coffee beans.
Never lift the lid when the grinding blades are still
running. Wait until the blades are completely still
before opening the lid.
To avoid the overheating of the motor, do not use the
equipment in continuous operation for more than 30
seconds; in that case, wait at least 3 minutes before
operating again.
Unplug the power cord from the electrical outlet after
each use.
Rewind the power cord under the base of the main body.
Do not wrap around the motor body so to prevent any
damage to the cord.
DESCRIPTION (G20128)
1) Operation button
3) Container
5) Motor housing
OPERATION
- Insert coffee or spices. Do not operate with more than 50 g of coffee beans.
- Connect the plug to the power outlet.
- Fit the cover on the motor block rotating clockwise. This unit has a safety device that prevents operation if
the lid is not correctly inserted to ensure the maximum safety during use.
- Operate the grinder by pressing the button (1).
- For a better and homogeneous result, it is recommended to operate with short and regular intervals by
pressing the pulse button (1).
- At the maximum capacity (50g) the process can take about 30 seconds, but may take less depending on the
amount of product and the consistency that you want to achieve. In any case, do not exceed 30 seconds
while operating.
- At the end of the grinding process, unplug it and pour the coffee into a container, gently shaking to bring
down the debris.
- After each use, wrap the power cord into the cable winder (7) on the bottom of the unit.
2) Lid
4) Grinding blade
6) Power Cord 7) Cable winder
9