HOMCOM 824-048V80 Manuel D'assemblage Et D'instructions page 15

2. Put the wire in the recess, then fix the base on the fan body with four
screws (included), and turn the screws clockwise (Fig
REMOTE CONTROL
1. Included a button cell battery (the type of battery CR2025).
2. The Remote Control Power button is labeled as such. All the functions
performed with the Remote Control work identically to the Manual Controls.
( Fig 3).
OPERATION
The FAN may be operated by the manual controls located on the FAN (as
shown in Fig 4) or by your remote control (shown in Fig 3) .
1.
Place the FAN on a stable flat surface. Plug the cord set into a 120V~
electrical outlet. Plug on the FAN, existing room temperature will be
displayed at display panel.
(Fig 2)
(Fig 3)
13
2).
(Fig 4)