Inseego 5G MiFi M2000 Mode D'emploi page 15

Setting up your M2000
Installing a SIM Card
. Carefully remove the back cover and battery.
2. Insert a Nano 4FF SIM card into the SIM card slot
located in the battery compartment. This device
supports only Nano SIM cards. If the device SIM
is NOT already inserted into this device, select
the correct SIM for this device.
Micro 3FF
Mini 2FF
SIM Card Slot
Important: For problem-free performance, make sure
to use the device with the correct type of SIM card.
Always use a factory-made SIM card supplied by the
service provider. Be careful not to damage the SIM card
when you insert or remove it.
All manuals and user guides at all-guides.com
Nano 4FF
Turning your M2000 on/off
To turn your M2000 on, press and hold the Power
button for three seconds.
To turn it off, press and hold the Power button for
three seconds until you see the Powering Off screen.
Then select Shutdown and tap OK.
Press and release the Power button to wake up the
display.
Power Button
System requirements
Any device with Wi-Fi capability and an internet
browser.
Your M2000 is compatible with all major operating
systems and the latest versions of browsers.
Finding the Wi-Fi name and password
Tap Wi-Fi Name/Password on the Home screen.
The information for your M2000 primary network will
be shown. Swipe left to see the info for your guest
network.
Important: The default Admin password
is the same as the primary network's default.
To change either password, sign in to the M2000
Admin website )see Accessing advanced settings(.
English