Time Mode - Numark KMX01 Guide D'utilisation Simplifié

started. Steady lighting of this LED
indicates the ready condition.
13.
START/PAUSE (Play/Pause Button)
- Each press of the Play/Pause Button
causes the operation to change from
play to pause or from pause to play.
14.
BPM/PITCH BUTTON - Switches the
mode of the display between showing
1.
PLAY: Active while the unit is
actually playing a CD.
2.
PAUSE: Active when the unit is
paused.
3.
CUE: Flashing when the unit is
setting a cue point. Lit continuously
when the unit is paused at a cue
point.
4.
PROGRAM: Used for pre-
programming the track order to
automatically be played by the unit.
This is a great function if you need to
leave the CD player alone.
5.
TIME MODE: (Elapsed) is for
showing time as it is taking
place.(Remain) shows how much
time is left on a particular track. This
function is controlled by the TIME
BUTTON.
6.
SINGLE: Shows when the unit is set
to play just one track at a time.
When this is not lit, the CD will play
continuously through all tracks. This
function is controlled by the
SING/CONT BUTTON.
15.
LCD DISPLAY FEATURES
6
the BPM and the percentage change in
pitch.
TAP BUTTON - Tap this button with
the beat of the music to determine the
current Beats Per Minute (BPM).
7.
PITCH: Is lit when the PITCH
BUTTON is active.
8.
TIME BAR: Shows either time
remaining or elapsed depending on
the setting of the TIME BUTTON.
9.
PITCH/BPM: Shows the percentage
change in pitch or current BPM.
10.
TRACK: Shows the current track
that the unit is playing.
11.
MINUTES: Shows the minutes
elapsed or remaining depending on
mode setting.
12.
SECONDS: Shows the seconds
elapsed or remaining depending on
mode setting.
13.
FRAMES: The CD Player breaks
down a second into 75 frames for
accurate cueing. This shows the
frames elapsed or remaining
depending on mode setting.