Fox Spirit FH238 Guide D'utilisation page 42

POWER UP
4. Connect the cables to the corresponding ports of your monitor and of your PC. The
sources will be automatically detected.
5. Press on the Power button to turn the monitor on. The led indicator will turn blue.
6. To change the Input
Menu. Use the buttons
Auto Select, DP, HDMI.
ADAPTIVE SYNC
To use this feature, you will need:
4. A computer equipped with the Adaptive Sync technology.
5. An HDMI / DP cable;
6. Updated graphic drivers.
Connect your computer and monitor with a DP/HDMI cable. After connecting, you may receive
a prompt to enable the feature on your computer.
If you do not receive the prompt, you may need to enable the function in your graphics card
menu. See your graphics card manufacturer's documentation for instructions on how to turn
on and/or enable Adaptative Sync.
source, press
or to choose the Input Source between
E
to enter the ''Input''