Technical Specifications - Adam Hall CAMEO Q-SPOT 40i Manuel D'utilisation

TECHNICAL SPECIFICATIONS

Article number:
Product type:
Type:
LED color spectrum:
Number of LEDs:
LED type:
PWM frequency:
Beam angle:
DMX input:
DMX output:
DMX mode:
DMX functions:
Standalone functions:
System settings:
Controller:
Control elements:
Display elements:
Operating voltage:
Power consumption:
Illumination intensity
(@ 3 m):
Luminous flux (RGBA):
Power input connection
(POWER IN):
Power output connection
(POWER OUT):
Ambient temperature
(running):
Housing material:
Housing color:
Housing cooling:
Protection class:
Dimensions (Ø x L, without
mounting bracket):
Weight:
Additional features:
CLQS40iB(W)
LED spot
Compact outdoor spot
RGBA
1 quad LED
40 W
3600 Hz
4.5° (10°, 25° with appropriate diffuser)
Cable with special 3-pin IP65 cable connector, male (adapter cable to XLR included)
Cable with special 3-pin IP65 cable connector, female
2-channel, 3-channel, 4-channel, 9-channel
Dimmer, dimmer fine, RGBW, strobe, color temperature correction, color macros, color change,
color blending
Color mixing, strobe, color macros, color blending, auto mode,
master/slave operation
Display reverse, display on/off, DMX fail, autolock, dimmer response, dimmer curves, white balance,
remote control on/off, factory reset
DMX512, IR remote control (optional), RDM-enabled
MODE, ENTER, UP, DOWN (touch-sensitive controls)
OLED display
100-240 V AC / 50-60 Hz
49 W
4100 lx (RGBA, 4.5°)
582 lm
Cable with 3-pin IP65 special cable connection, male (adapter cable with CEE 7/7 plug included)
Cable with 3-pin IP65 special cable connection, female (power out maximum 5.8 A)
-5°F to 113°F
Metal
Black (CLQS40IB)
White (CLQS40IW)
Convection
IP65
4.17 x 6.29 inches
4.4 lbs
Adjustable mounting or stand bracket, and earth anchor included. Safety eyebolts on the device.
Power cable, DMX adapter cable, 1 set of sealing caps, 2 diffusers, and IR remote control included
(CLQSREMOTE2)
13