Télécharger Imprimer la page

EMERGENCY PLUG 210-4062 Mode D'emploi page 47

Publicité

Les langues disponibles

Les langues disponibles

4 The vehicle may give an error message when the product is plugged in. This
error message is caused because the vehicle does not receive power through
the charging port. This does not affect the proper functioning of the product.
The error message disappears automatically when the product is unplugged and
the vehicle is switched on again via the power button.
7.3.
Unplugging
DANGER
6
Crushing hazard!
Always ensure the vehicle is secured according to locally applicable protocols
before unplugging the product from the vehicle.
Unplug the product as follows:
pull the product to unplug the product from the charging port.
The led indicator flashes red.
7.4.
Switching off
Switch off the product as follows:
1.
press and hold the power button. The led indicators light up yellow
sequentially.
2. Wait until the led indicator flashes orange.
3. Release the power button.
The product is switched off.
4 if the product is not switched off, the product remains switched on until the
batteries are depleted.
EN
47

Publicité

loading