Publicité
Les langues disponibles
Les langues disponibles
7.2.
Plugging in
NOTICE
•
only use the product on an R100 vehicle. The correct operation of the product
can only be guaranteed for vehicles that comply with the R100 directive. do
not use the product with converted vehicles, as converted vehicles do not
necessarily comply with the R100 directive.
plug the product into the charging port of the vehicle as follows:
1.
press the power button on the product.
2. open the vehicle's charge port door.
The product starts the self-test function. Refer to Chapter 6.2.Using the self-test
function for more information.
3. plug the product into the charging port of the vehicle. press the product in
firmly.
The led indicator first flashes yellow and then lights up blue.
4 Make sure you use the correct plug type when plugging the product into a
vehicle. Refer to Chapter 2.2.Plug types for more information.
4 The led indicator should light up blue within a maximum of 5 seconds. if the
led indicator reacts differently, refer to Chapter 2.4.LED colour coding plugged
in.
46
Publicité
