Binatone HB-733 Manuel D'instructions page 7

All manuals and user guides at all-guides.com
6. Place the body of appliance (1) on mincer gear (8). Align
appropriate openings in the body (1) and in the mincer gear
(8).
7. Prior to switching on the appliance, make sure that the gear
(8) is properly installed!
8. Plug the appliance into mains.
9. Set desired speed using speed selector (2) and push switch
button (3,4) to turn on the appliance. Keep the button pressed
while the appliance is operating.
10.Unplug the appliance from mains after use.
MAINTENANCE AND
CLEANING
1. Always unplug the appliance from mains
before cleaning.
2. Remove blender, mincer or whisk (6,7,8)
from the body (1), by pressing release buttons
(5). Wash blender, mincer or whisk (6,7,8),
blade (10a,10b), blending glass (13) and
mincer bowl (11 A, 11B) in warm water and
get them completely dried.
3. Wipe the body (1) and power cord (12) with moisturized
fabric and then wipe them dry.
4. Never plunge the body (1) and power cord (12) in water.
5. Do not use abrasive cleansers to clean parts of the appliance.
6. Get the appliance completely dried before use.
7. Blender and whisk (6,7) can be stored using wall bracket
(14).
USEFUL TIPS
To produce a homogeneous mixture, move the
attachment in a circle inside the container. If you
need to scrape off the remainder of the unblended
ingredients from the walls of the container used for
blending, stop the appliance and scrape off the
remainder of the ingredients from the walls, using
a spoon. Then proceed with the blending process
in the selected mode.
You can change the blender speed during the blending pro-
cess.
DISPOSAL
The appliance should be disposed of in accor
dance with waste disposal regulations in your coun
try and with the least damage to the environment.
Only ecologically safe materials are used in
the packaging of our products and the cardboard
and paper can be disposed of with normal paper
waste.
7