Télécharger Imprimer la page

JVC KS-RC107 Instructions De Montage page 2

Publicité

Possible remote controls:
Geeignete Lenkradfernbedienungen:
Commande au volant compatible:
Kangoo, Clio, Megane, Scenic
Installation:
Einbauanleitung:
Procédure d´installation:
1.
Remove and disconnect the car receiver previously built in your car.
Das Originalradio ausbauen.
Démontez la radio d'origine.
2.
Connect the black ISO plug from KS-RC107 to the car harness.
Schwarzen ISO Stecker vom KS-RC107 auf das Gegenstück im Radioschacht stecken.
Liez la fiche ISO noire de la KS-RC107 au pendant dans l'ouverture d'emplacement de la radio.
3.
Put the mono plug from KS-RC107 into the JVC car receiver.
Den Klinkenstecker des KS-RC107 mit der Kupplung am JVC Radio verbinden.
Liez la fiche à jack du KS-RC107 à la radio JVC.
4.
Connect the red wire from KS-RC107 to Ignition lead/terminal (KL.15), and the ISO connector to
the JVC car receiver.
Einzelne rote Leitung des KS-RC107 mit der Zündung (Klemme 15) verbinden, ISO Stecker in
das JVC Radio stecken.
Liez le câble rouge de la KS-RC107 à l'allumage (borne 15),
branchez la fiche ISO dans la radio JVC.
5.
Switch on the JVC car receiver and check the steering wheel control.
JVC Radio einschalten, Steuerfunktionen überprüfen.
Allumez la radio JVC, vérifiez les fonctions de contrôle.
6.
Put back the JVC car receiver into the dashboard or its dedicated location.
JVC Radio einbauen.
Montez la radio JVC.
LVT1098-008A
Downloaded from:
https://www.usersmanualguide.com/
Laguna, Laguna II
2

Publicité

loading