DVO DV804 Mode D'emploi page 4

DV804
Technical Data Sheet
Desks, typing tables, compact and shaped desks, meeting tables, extension desks, are composed of following elements:
TABLES WITH METAL
STRUCTURE:
("Type C" Re: EN 527-1:2011 Norm):
METAL LEGS WITH
• For single desks: Legs trestle Shaped, composed by a horizontal transverse of tubular metal with rectangular cross-section 60x40x1,5
FIX HEIGHT:
mm thick, and vertical uprights made of stamped metal sheet 1,5 mm thick, with a variable section form. Legs are available in following
finishes: semi-gloss white, structured aluminium or semi-gloss anthracite. The legs are equipped with ABS top cover cap and ferrules in
white, grey or anthracite finish, with grey height adjustable feet. They are connected to the beams-track, by means of suitable joining
elements with inverted "U" shape, made of stamped and galvanized steel 5 mm thick. The legs become intermediate, if integrated to the
beams-track with special extensions of pressed steel 3 mm thick.
• For "bench" desks terminal: They are composed of 2 external uprights, manufactured with the same features as those of the leg for
individual tables and by a horizontal transverse tubular metal of rectangular cross-section 60x40x1,5 mm thick. Legs are equipped with
cover caps and ferrules of moulded ABS in white, grey or anthracite colour, with adjustable feet in grey colour. They are connected to the
beams-track, by means of suitable joining elements with inverted "U" shape, made of moulded and galvanized steel 5 mm thick.
• For "bench" desks intermediate: They are composed of 2 recessed uprights, manufactured with the same features as those of the leg for
individual tables and by a horizontal transverse tubular metal of rectangular cross-section 60x40x1,5 mm thick. At both ends of the crosspiece
there are cover caps of moulded ABS in white, grey or anthracite colour. They are connected to the beams-track, by means of suitable joining
elements with inverted "U" shape, made of moulded and galvanized steel 5 mm thick and special extensions of pressed steel 3 mm thick.
• Freestanding legs: They are manufactured with the same features as those of the leg for individual tables to which an upper plate made
of stamped sheet metal 2,5 mm thick is welded.
They are made of folded metal sheet 2 mm thick, with a trapezoidal open section, painted in a structured aluminium finish. At both ends of
METAL
beam-tracks there are cover caps of moulded ABS in white, grey or anthracite colour. The beams of the extensions are designed to hook the
BEAMS-TRACK:
beams-track of the desks with a pair of telescopic brackets, made of bent metal sheet 3 mm thick, and special joints made of die-cast zamak.
Used for conference tables, it is composed of a 80x80 mm square section tubular steel 3 mm thick, with 490 mm diameter top plate 8 mm thick
METAL COLUMN:
and a square base 550x550 mm in 10 mm thick metal sheet. All in colour embossed aluminium, semi-gloss white or semi-gloss anthracite.
Made of 25 mm thick wood conglomerate, coated with white, light grey, light oak, tobacco oak, dark oak, walnut or umber melamine with
WORKTOPS:
2 mm thick ABS edge profile; or in 25 mm thick MDF coated with black matt melamine with 2 mm thick ABS edge profiles.
The central rail is manufactured in extruded anodized aluminium, with a rectangular section of 64x18 mm, equipped at each end with
CENTRAL RAIL, WITH
dedicated 25 mm grey ABS caps. Along the whole length, on its inside, there is a grove made to receive bolts that allow the fixing of the
AND WITHOUT FLIP
brackets in ABS, that hold the frontal panels, the lamps and the shelves. Two flip doors (one each side) are fixed with special hinges to the
DOORS:
central profile. They allow for inspection and for the cables exit onto the desktop. A push-pull system set under the worktop is integrated
at the rail with two flip doors. The rail version without flip doors is used between two opposed desk tops 136,5 and 166,5 cm deep, whilst
the rail with flip doors is used on the 158 cm deep benches.
Central rails are fixed to the metal desk structures through special supports, manufactured with bended metal sheet 2 mm, in aluminium
finish, and special joints made of die-cast zamak.
Worktops manufactured in 25 mm thick wood conglomerate, coated with white, light grey, light oak, tobacco oak, dark oak, walnut or
CONNECTIONS:
umber melamine with 2 mm thick ABS edge profile; or in 25 mm thick MDF coated with black matt melamine with 2 mm thick ABS edge
profiles. For fixing 40 cm depth semi-circular connections to the desks, a special support bracket made in bent sheet metal and painted
with embossed aluminium colour, it is provided. Some connections are equipped with a special metal column (see the concerning chapter).
Made of 25 mm thick wood conglomerate, coated with white, light grey, light oak, tobacco oak, dark oak, walnut or umber melamine with
TERMINAL TOPS:
2 mm thick ABS edge profile; or in 25 mm thick MDF coated with black matt melamine with 2 mm thick ABS edge profiles. They are
fixed with special support brackets made in bent 2 mm thick sheet metal and painted with embossed aluminium colour. The 65 cm deep
terminal tops are equipped with special metal columns, (see the concerning chapter).
Available with sliding doors. Body made of 18 mm thick wood conglomerate, coated in white or aluminium finish melamine and 1,5 mm
TERMINAL STORAGE
thick ABS edge banding on the perimeter. The top is made of 18 mm thick wood conglomerate, coated with white or aluminium finish
UNITS:
melamine and 2 mm thick ABS edge banding on the perimeter. Sliding doors are made of 18 mm thick wood conglomerate coated in
aluminium, bamboo green, poppy red, mustard yellow, umber, turquoise blue colour melamine and they have 1,5 mm thick ABS edge
banding in aluminium colour. When coated in white, light grey, light oak, dark oak, tobacco oak, and walnut colour melamine, they have
a matching 1,5 mm thick ABS edge banding; or in 18 mm thich MDF coated with black matt melamine with matching 1,5 mm thick ABS
edge banding.
Doors are fixed through special hooks to the aluminium rails applied inside of body: nos. 2 under the top and nos. 2 on the bottom. Push
lock with two bendable keys with grey ABS key-caps. Terminal storage units are fixed to the desk in the following ways:
• with special brackets in bent sheet metal in aluminium grey colour, hooked to the crosswise of the metal leg. In this way the top of the
storage unit coincides with the worktop of the table; and the two tops are kept parallel thanks to "adjustment pieces" positioned under the
bottom of the unit.
• with special brackets in bent 2,5 mm thick sheet metal hanged to the beams-track with special joints made of die-cast zamak. In this way
the storage unit is under the beams of the worktop. The top of the under-top unit is made of wood conglomerate 18 mm thick
Terminal storage units with doors can also be assembled stacked, sitting on the floor, using special fitting kits.
Manufactured in 18 mm thick wood conglomerate, coated with white, light grey, light oak, tobacco oak, dark oak, walnut, or umber
MODESTY PANELS:
melamine finish and with 2 mm thick ABS edge banding on the perimeter; or in 18 mm thick MDF coated with black matt melamine with
2 mm thick ABS edge banding on the perimeter. The 2,5 mm thick brackets are available in semi-gloss white, embossed aluminium or
anthracite finish to be fixed to the beams-track of the tables using special joints in die-cast zamak.
• For the horizontal wire management of single tables: there is a channel for cables made of PVC extruded aluminium gray, available in
WIRE MANAGEMENT:
different lengths. It is fixed along the beams-track or freely under the worktops. It is fastened with a series of hinges made of moulded
ABS, in aluminium gray colour, which allow the fixing and rotation of the channel for cables. In each packaging there are block-cables
clips. The cable ducts are designed for blocking the Schuko sockets, using special moulded hooks in grey ABS.
• For the horizontal wire management of bench tables: there is a channel for cables available in several lengths made of bent metal sheet
8/10 mm thick, with fixing brackets in 3 mm thick sheet metal, all in a structured aluminium finish. It is equipped with lateral chromed
ABS cover caps. Sheet metal extensions for the connection of the cable channels are available. It can also be completed with cable tidies
with 4 or 6 spaces, made in aluminium coloured plastic.
• For the vertical wire management there is: a special casing in bent metal sheet is available; it shall apply to the uprights of the legs with
magnets. Also an ABS spiral cable ducts is available.
(N.B.: for additional wire management solutions, please see price list under DV300-Accessories).
4