Publicité
Les langues disponibles
Les langues disponibles
Before first Use
Take the LED hand lamp out of the packaging. Keep packaging
material out of reach of children. There is risk of suffocation!
Inserting the Batteries
1. Press the clamps on both sides of the
battery compartment lid (6) and remove the
lid.
2. Remove the battery holder from the housing
and insert four batteries of the type LR14
(C) by observing correct polarity. The polari-
ty symbols are shown inside the battery
holder.
3. Insert the battery holder correctly into the
housing. The polarity symbols are marked
inside the housing.
4. Close the battery compartment with the lid.
Using the Hand Lamp
1. Press the ON/OFF switch (2) once in order
to switch on the LED light. To switch off the
light, press the ON/OFF switch again.
2. To pivote the handle press the handle
releasing button (3) first and turn the han-
dle.
3. Release the button (3) and turn the handle
up to 180°, until the handle engages in
place.
All manuals and user guides at all-guides.com
Operation
7
Publicité
