Cleaning And Storage; Technical Specifications - weewell WTE220 Mode D'emploi

Masquer les pouces Voir aussi pour WTE220:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9.Cleaning and Storage

Use and alcohol swab or cotton tissure mistened with alcohol (70% Isopropyl) to
clean the thermometer casing and the measuring probe. Ensure that no liquid
enters the interior of the thermometer. Never use abrasive cleaning agents,
thinners or benzene for cleaning and neverimmerse the instrument in water or
other cleaning liquids. Take care not to scratch the surface of the LCD. Remove
the battery from the instrument if it is not required for extended periods of time
in order to avoid damage to the thermometer resulting from a leaking battery.

10.Technical Specifications

Type
M
e
s a
r u
n i
g
R
a
n
g
e
Accuracy
(Laboratory)
D
s i
l p
y a
Accoustic
M
e
m
o
y r
Night Glow
(Optional)
Operating
Temperature
Storage/Transport
Temperature
Automatic switch
Off
Battery
Dimensions
Weight
Standarts
Digital Infrared Ear Thermometer
Body Temp
: 32.0 - 42.9°C (89.6 - 109.2°F)
Wide Temp : 0 - 50.0°C (32.0 - 179.6°F)
±0.2°C : 32.0 - 42.9°C aralığında
(±0.4°F : 89.6 - 109.2"F)
±1°C : 0 - 31.9°C; 43.0 - 50.0°C between
(±2°F : 32.0 - 89.5°F; 109.3 - 179.6°F)
I Liquid Cristal Display with indicating unit 0.1 °C
•The unit is turned ON and ready for the measurement: 1
•short "bi" sound. •Complete the measurement: 1
long beep sound. •System error or malfunction: 3
Auto-display the last measured temperature when switched on
The display will be lighted for 4 seconds when the unit is turned ON
• The display will be lighted again for 5 seconds when the
measurement has been completed.
10-40°C(50-104°F)
Approx.1 minute after last measurement has
I been taken.
-25-55°C(-13-131°F)
"AAA" battery, X 2
155mm(U) x 33mm(G) x 45mm(Y)
87g(Pil ile), 68.5g(w/o battery
)
PrEN12470-5 ve ASTME-1965 requirements
(8)

Publicité

Table des Matières
loading

Table des Matières