Télécharger Imprimer la page

Blaupunkt BP-GIKLED05 Mode D'emploi page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
BP-GIKLED05
5. Operation
1. Install the insect killer on a stable and non-slippery surface.
2. Connect the insect killer to the power source.
3. Disconnect from the power supply after use.
For best results, turn off other light sources and prevent from installing the appliance in the draught.
Safety Sensor
This insect killer is equipped with a safety sensor. The insect killer stops working automatically when the
collection tray is being taken out.
6. Troubleshooting
Appliance does not start
Appliance does not light
7. Care and Maintenance
Storage
Store the appliance and its accessories in a clean and dry area.
Cleaning
Caution – Risk of electroshock. Never touch the metal grid with your bare hands.
The cleaning frequency depends on the intensity of use. Check the tray of the device at least once a week.
Clean more often if necessary.
Before starting any cleaning or maintenance activities, unplug the appliance from its power source, wait for
5 minutes and let it cool down.
Wipe all exterior surfaces of the appliance clean with a soft cloth dampened with a soap and water solution. Do
not immerse or submerge any part of the appliance in water or any other liquid. Never use solvents or cleaning
agents containing petroleum (petrol, kerosene, oil), paint thinner, turpentine, alcohol, or ammonia.
Maintenance
All repairs should only be carried out by qualified service personnel. Do not open exterior casing of the
appliance. There are no user-serviceable parts inside. Opening or visible attempts to open or repair the
appliance may void any guarantee and/or cause damage to the product or personal injury.
BP-GIKLED05.indd 4
Problem
Power supply not connected well
On-off button not pressed
Power supply not connected well
PCB board is damaged
Noisy fan
Foreign objects in the fan
Reason
Light is damaged
PCB Board cannot be replaced; scrap
4
Possible solution
Reconnect the power supply
Press the on-off button
Reconnect the power supply
Light source cannot be replaced;
scrap the appliance
the appliance
Clean the fan
10/01/2019 13:35:17

Publicité

loading