Dymond LED BEAT Mode D'emploi page 3

HOW TO USE THE DYMOND LED-BEAT?
The LED-BEAT can be used stand-alone, using the
rechargeable battery and can be controlled using the buttons on the main unit.
The LED-BEAT is:
Bluetooth Speaker
®
Music player with AUX / USB / TF input
FM-radio
Handsfree calling
PARTS & BUTTONS
1. - Short press: Search for radio stations in FM mode
- Short press: Play/Pause the music
- Short press: Answer/end call during handsfree calling
- Press 2x: Redial last number
- Long press: Turn ON/OFF LED lights
2. - Short press: Mode selection
3. - Short press: Go to previous track / FM station
- Long press: Decrease the volume
4. - Short press: Go to next track / FM station
- Long press: Increase the volume
5. Micro USB charging slot
6. ON/OFF switch
7. Micro SD/TF card input slot
8. USB input slot
9. AUX input port
10. Micro USB charging cable
11. AUX cable
12. LED indicator
CHARGING THE BATTERY
! The LED-BEAT must be fully charged before first use!
1. Plug the micro USB cable (10) into the micro USB charging socket
(5). Plug the other end of the USB cable (10) into your computer
or USB travel charger (not included). It is recommended to charge
the speaker when it is turned OFF, to maximize battery life.
All manuals and user guides at all-guides.com
GB
2.
3.
The LED-BEAT battery offers up to 6 hours wireless music time. Music
time may vary from usage (volume + LED lights ON/OFF).
TURNING ON / OFF
Turning ON: Slide the ON/OFF switch (6) to ON position.
Turning OFF: Slide the ON/OFF switch (6) to OFF position.
VOLUME
Long press I<< (3) to decrease the volume. Long press >>I (4) to increase the
volume. When minimum/maximum volume is reached, you will hear a beep.
MODE SELECTION
Press M (2) to switch between Bluetooth
AUX mode is only available after connecting the AUX cable (11) to the
AUX input port (9).
USB mode and TF/SD card mode are activated automatically when
inserting a USB device or SD/TF card into the corresponding slot.
BLUETOOTH
A. PAIRING
1.
2.
To ensure automatic reconnection between the phone and the LED-
BEAT, we recommend setting the LED-BEAT as "Authorized" in the
Bluetooth
mobile phone for more detailed information.
-3-
The red LED indicator (12) at the back of the LED-BEAT will light
up and your device will start charging. When the battery is fully
charged, the LED indicator (12) will turn off.
When the battery capacity is low, you will hear a beep.
MODE
®
Bluetooth mode is activated automatically when turning ON the
®
unit. You will hear "Bluetooth
®
Let your phone search for Bluetooth
LEDbeat" to pair both devices. You will hear a beep. You can now
use you LED-BEAT to listen to your favorite music wirelessly.
menu of your phone! Please refer to the manual of your
®
and FM mode.
®
mode".
devices. Select "DYM
®