ErGear EGSS3 Manuel D'instructions page 2

IMPORTANT SAFETY INFORMATION
Please carefully read all instructions before attempting installation. If you do not
understand the instructions or have any concerns or questions, please contact our
customer service at support@ergear.com.
CAUTION: Avoid potential personal injuries and property damage!
• Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We are not liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
• This product contains a high pressure gas spring, fire and percussion prohibited. Also it
is strictly prohibited to dismantle without professionals. Please return to the manufacturer
or hand over to professional agencies if the product is abandoned.
• The desk must be capable of supporting three times the weight of the total load (the
mount, the monitor and all accessories weight). Don't use the product on particle board.
Weight Restrictions
4.4- 19.8 lbs.
(2- 9 kg)
Your monitor (including
accessories) CANNOT EXCEED
4.4- 19.8lbs (2- 9 kg)
Check the VESA Pattern of Your Monitor before You Begin the Installation
If your Monitor VESA is greater than 100x100 mm/ 4x4 in. or less than
VESA 75x75mm/ 3x3in., this mount is NOT compatible.
If this desk mount is NOT compatible, please contact customer service
at support@ergear.com to find a compatible product.
All manuals and user guides at all-guides.com
DO NOT exceed the maximum weight indicated.
This mounting system is intended for use only within
the maximum weights indicated. Use with products
heavier than the maximum weights indicated may
result in failure of the mount and its accessories,
causing possible damage and or injury.
If your monitor weighs more, this mount is NOT
compatible.
WARNING
75 mm ≈ 3 in.
100 mm ≈ 4 in.
Minimum VESA pattern:
75mm/ 3 in.(W)x75mm/ 3 in.(H)
01