ErGear EGSS3 Manuel D'instructions page 13

Step 8 Route Cables along the Arm
Screwdriver
[Not Included]
Secure the Cable Cover [04] to the arm [01] by
tightening the bolts [G] using screwdriver
Loosen the preassembled bolts [S] on the
arm [01] to detach the cable guide from the
arm [01], and keep the bolt for the use in
next step
All manuals and user guides at all-guides.com
04
S
Route the cables into the cable guide and
secure the cable guide by tightening the
bolts [S] using screwdriver
12