Publicité
All manuals and user guides at all-guides.com
2.4 Cabling
First you must connect the product to the ADSL line through the RJ11 cable
you have in equipment (in the port LINE), then connect to the RJ45 port the
PCs of your Lan or others Switch. In the end connect the feeder to the
VoIP Router ADSL and then to the socket. Once you've checked all the
connections and you've turned on the VoIP Router ADSL the product will
carry on immediately a diagnosis (20 seconds). Finished this the Led
POWER and LAN will be fixed green (SYS is blinking when system os
ready) . The Led ADSL, if suitably connected, at first will be flashing ,
during the ranging process and then it will remain fixed (necessary condition
for using the Internet).
2.5 Default Settings
The VoIP ADSL Router can be configured with your Web browser. The
web browser is included as a standard application in following operation
systems, UNIX, Linux, Mac OS, Windows 95/98/NT/2000/Me, etc. The
product provides a very easy and user-friendly interface for configuration.
Before Configuration
This section describes the configuration required by LAN-attached PCs that
communicate with the VoIP Router ADSL, either to configure the device, or
for network access. These PCs must have an Ethernet interface installed
properly connected to the VoIP Router ADSL either directly or through an
external repeater hub, and have TCP/IP installed and configured to obtain
an IP address through a DHCP server or a fixed IP address that must be in
the same subnet of the VoIP Router ADSL. The default IP address of the
VoIP Router ADSL is 192.168.1.254 and subnet mask is 255.255.255.0.
The best and easy way is to configure the PC to get an IP address from the
VoIP Router ADSL.
Please follow the steps below for PC's network environment installation.
First of all, please check your PC's network components. The TCP/IP
protocol stack and Ethernet network adapter must be installed. If not,
please refer to MS Windows relative manuals.
Before you configure this VoIP Router ADSL, you need to know the
following default settings:
•
Username:admin
•
Password:atlantis
•
IP address (192.168.1.254), Subnet Mask (255.255.255.0)
•
DHCP Server: enable
ENGLISH
16
Publicité
