Publicité
• Place the device on a flat surface.
• Open the water tank and fill with water. Do not overfill.
• Plug the USB power adaptor into a compatible outlet, connecting this to the power port on
the back of the device. The USB can be plugged into a wall outlet or computer port.
• Tips for using:
• Place the device on a raised surface such as a desk or countertop. This will allow your per-
sonal area to be cooled much faster.
• The coolest area will be directly in front of the device. Please try to position the device so
that you are in this area.
• Keep the water tank filled with water to allow continuous cooling.
• Even when the water tank is empty, the device will continue cooling as the filter may still
be soaked with water.
• If the device is not to be used for some time, during winter for instance, please empty the
water tank and power the device on for 4 hours on high speed. This will dry out the filter
and interior of the device.
1. Handle
2. Water tank
3. Control panel
4. Front grill
5. Filter housing
6. Main body
7. Air outlet
8. USB power cord
9. USB port connector
1. Press the ON/OFF button for 3 seconds to power on the device.
2. Select the desired fan speed. There are 3 fan speeds to choose from: Low, Medium, High.
Cycle through fan speeds by pressing the Fan button.
3. Press the Timer button to program the device from 1 to 8 hours.
4. Press the ON/OFF button once to power off the device.
It is recommended to clean this air cooler at least once a month and before storage. Turn
the unit OFF, unplug the unit and allow it to cool down. Use a dry cloth to clean the external
surface of the air cooler. Do not use water, wax or polish or any chemical solution.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous sub-
stances in electric and electronic equipment as well as their waste disposal. The symbol with the crossed
dustbin shown on the package indicates that the product at the end of its service life shall be collected as
separate waste. Therefore, any products that have reached the end of their useful life must be given to waste
disposal centres specialising in separate collection of waste electrical and electronic equipment, or given
back to the retailer at the time of purchasing new similar equipment, on a one for one basis. The adequate
separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of
in an environmentally compatible way contributes to preventing possible negative effects on the environment
and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal
of the product by the user involves application of the administrative sanctions according to the laws.
FIRST TIME USE
PARTS LIST
1
2
3
4
5
OPERATION
CLEANING AND MAINTENANCE
6
7
8
9
E NGLI SH
7
Publicité
