Tintometer Lovibond MD200 CSB Mode D'emploi page 16

Functional description – General notes
GB
!
!
Replacement of batteries:
(F) instrument back
CAUTION:
To ensure that the instrument is water proof:
• seal ring (E) must be in position
battery compartment cover (B) must be fixed with the four screws
•
If the batteries are removed for more than one minute the date and time menu starts auto-
matically when the photometer is switched on the next time.
16
Display backlight
Press the [!] key to turn the display backlight on or off. The backlight
is switched off automatically during the measurement.
Recall of stored data
If the instrument is switched on, press the [ ! ] key for more than
4 seconds to access the recall menu.
(D) batteries
(C) notch for
(B) battery compart-
ment cover
IR
data transfer
(E) seal ring
(A) screw
MD200_1a 08/2011