Publicité
5.2 Inserting a memory card (not included)
This camera has no built-in internal memory. Micro SD memory card is required (not included).
Follow the instructions below to insert the optional micro SD memory card into the camera.
1.
Turn off camera.
2.
Open the battery door.
3.
Insert the micro SD card into the camera.
Note: There is only one correct direction to insert the micro SD memory card into the slot. Do
not force the card into the memory card-slot, it may damage both the camera and the
micro SD memory card.
Note: The micro SD memory card must be formatted before taking photographs. See the
following sections for more information.
5.3 Formatting the micro SD card
1.
Press the menu button (
2.
Select the setup mode by pressing the right button.
3.
Select the format icon by pressing the
confirm.
4.
Press the SHUTTER button to format the SD memory card.
5.4 Setting the resolution
The camera can be set to different resolutions.
1.
Press the menu button (
(
) key and press the SHUTTER to confirm.
Resolutions: VGA (640 x 480), 3M (2048 x 1536),
2.
Five different resolutions will be displayed. Select the desired resolution by using the up
or down button and press the SHUTTER button to confirm the selection.
5.5 Taking photographs
1.
Turn on the camera.
2.
Depending on the distance to the object being photographed, use macro switch to adjust
the distance. Select the flower symbol (
All manuals and user guides at all-guides.com
) in PHOTO or VIDEO mode.
) in PHOTO mode, select the resolution icon using the
5M (2592x1944), 10M (3648x2736),
16M (4608x3456)
W
(
) button and press the SHUTTER button to
) if you wish to take a close-up photograph
W
Publicité
