Télécharger Imprimer la page

Intova SP10 Mode D'emploi page 11

Publicité

8. System requirement
Operating system
CPU
RAM
Interface
CD
9. Troubleshooting
Problem
Cannot turn on the camera
Photos can not be saved
when taking pictures.
Cannot find removable disk
after connecting the
camera to the computer
Flash does not work.
The batteries used up very
fast.
The photos are blurry
All manuals and user guides at all-guides.com
Win XP (SP3)、Vista32/64 Win7 32/64 and Mac OS X 10.6.8
or above
Pentium 4 / 3.0G or faster recommended
1 GB MB RAM (Vista : 2 GB)
USB port
CD ROM Driver
Cause
Low battery power.
Battery placed at wrong
polarities.
The memory card hasn't
been formatted properly.
Connection failure.
.
Battery power is too low.
Incorrect or old batteries
1. The camera is not held
steadily
2. The lens of camera is
dirty.
Solution
Replace or install the battery
correctly.
Format the memory in setup
mode of the camera. Please
refer to section 5.3.
Make sure all cable connections
are secured and restart the
computer if necessary.
Replace with new 2 x AAA
alkaline batteries
Replace with 2 x AAA alkaline
batteries
1. Hold the camera steadily until
it beeps when taking video
photo.
2. Clean the lens with soft dry
cloth.
For EU only

Publicité

loading