DELSEY PLUGGAGE Mode D'emploi page 25

ngerprint reader
prints.
reach the inside
Lithium
tteries
All manuals and user guides at all-guides.com
Slide the reader cover to open it.
The white LED blinks which indicates you can place your
finger (A) to record your print.
B
If the white LED (B) is continuous your fingerprint has been
well recorded. If the white LED keeps blinking remove and
replace your finger until the LED becomes continuous.
Press the button to record a new print. You can record up to
30 prints.
To unlock the suitcase, Place your finger on the reader until
the LED stops blinking. Both pullers are ejected. Otherwise,
remove and replace your finger on the reader.
For better reading of your print, please lay your finger flat.
Avoid placing the tip of your finger on the reader.
If the fingerprint reader does not work (red LED blinking),
use the 3 figure code of the lock or the OPEN feature of the
DELSEY PLUGGAGE app.
Open the lock settings to name each recorded print. You can
also delete print records.
A
25