König Electronic CMP-SPUSB30 Mode D'emploi page 2

All manuals and user guides at all-guides.com
Operation and connection
Connect to USB port
• Connect the USB jack to the PC or notebook.
• Use the Volume Control to adjust the volume of the speakers.
• Press the Standby button to turn off the sound if necessary.
IMPORTANT
Please unplug the system if any of the following conditions arise:
• The cord or plug becomes frayed or otherwise damaged.
• Your system has been dropped or the enclosure has been damaged
otherwise.
• The system has come in contact with liquids.
• You suspect that your system needs repairing.
• Your system is exposed to rain or any other excessive moisture.
TROUBLESHOOTING
If you experience problems during the installation of your system please
first check the following aspects:
• Make sure you've properly connected the system to your PC or
notebook.
• Make sure the power supply is switched on.
• Check the LED light on the speaker. If it is not on, check the
connection.
• Please disable the internal sound card of your computer when
the USB speaker does not produce any sound and your internal
soundcard still plays the music.
ENGLISH
Standby
Volume Control
2
LED