NGS Technology DOMO Mode D'emploi page 9

USER'S MANUAL
cOnfIgURIng vIA WEB BROWSER
firmware Upgrade
The system software used by this router is called as "firmware", just like any
applications on your computer, when you replace the old application with a new
one, your computer will be equipped with new function. You can also use this
firmware upgrade function to add new functions to your router, even fix the
bugs of this router.
Please click "Management → Upgrade Firmware" located at the web
management interface, then the following message will be displayed on your
web browser:
Click "Browse..." button
first, you'll be prompted
to provide the filename
of firmware upgrade file.
Please download the
latest firmware file from
our website, and use it to
upgrade your router.
After a firmware upgrade
file is selected, click
"Upload" button, and
the router will start
firmware upgrade
procedure automatically.
The procedure may take
several minutes, please be
patient.
note: Never interrupt the upgrade procedure by closing the web browser or
physically disconnect your computer from router. If the firmware you uploaded
is corrupt, the firmware upgrade will fail, and you may have to return this router
to the dealer of purchase to ask for help. (Warranty voids if you interrupted the
upgrade procedure).
All manuals and user guides at all-guides.com
factory Default and Settings Backup, Restore
You can back up all Setting of this router to a file, so you can make several copied
of router configuration for security reason.
To backup or restore
router setting, please
follow the following
instructions:
Please click "Save/
Reload setting" located
at the web management
interface, then the
following message will
be displayed on your web
browser:
Save Settings
Load Settings
Reset Settings
9
Press "Save..." button, you can please save it as another
filename for different versions, and keep it in a safe
place
Press "Browse..." to pick a previously-saved
configuration file from your computer, and then click
"Upload...". After the configuration is uploaded, the
router's configuration will be replaced by the file you
just uploaded
Click this "Load default" button to remove all settings