Télécharger Imprimer la page

Key Automation SEL4 Instructions Et Avertissements Pour L'installation Et L'usage page 9

Publicité

Les langues disponibles

Les langues disponibles

DESCRIPTION
You will hear a double beep that invites you to enter
the new user password from 1 to 8 digits; you have 10
seconds to start entering.
Once the new password is entered, it will be necessary
to confirm it by pressing the key
confirmation beep and if there has been an error you will
hear a long beep.
Then you will hear a double beep again informing that
you can enter another password.
If you want to finish the procedure, simply press again
the key
. Lighting will dim after 5 seconds.
4.7 CHANGING THE SERVICE OF A USER PASSWORD
DESCRIPTION
If you want to change the service combined with a
password, you must enter the master password and
confirm it by pressing the "F" key.
A beep will be heard every 2 seconds that invites us to
enter the service from 1 to 3; confirm it by pressing the
key
.
You will hear a double beep inviting you to enter your user
password; you have 10 seconds to start entering.
Once the password has been entered, it will be necessary
to confirm it by pressing the key
confirmation beep and if there has been an error you will
hear a long beep. Lighting will dim after 5 seconds.
4.8 CHANGING A USER PASSWORD
NOTES: You cannot change a user password directly. The equivalent procedure consists of two steps:
1. Deletion of the user password to be replaced (see point 4.9).
2. Entering the replacement user password (see point 4.6).
4.9 DELETING A USER PASSWORD
DESCRIPTION
If you want to delete a user password, you must enter the
master password and confirm it by pressing the "F" key.
A beep will be heard every 2 seconds that invites us to
enter the delete command "5"; confirm it by pressing the
key
.
You will hear a double beep inviting you to enter the
password to be deleted; you have 10 seconds to start
entering.
Once the password has been entered, you will need to
confirm it by pressing the key
confirmation beep and if there has been an error you will
hear a long beep. Lighting will dim after 5 seconds.
. You will hear a
; you will hear a short
. You will hear a short
EXAMPLE
555
EXAMPLE
12345678
2
EXAMPLE
12345678
5
BEEP
BEEP
+ 2s +
+ 2s
<0.5s
BEEP
+ 2s +
+ 2s
<0.5s

Publicité

loading