Publicité
9.3.2. UK Declaration of Conformity (UKCA)
Aerservice Equipments Sr
l
Company
Viale dell'Industria, 24
Address
Padova
Province
Trolley-mounted air cleaner for the extraction of welding fumes
Description
Serial number
UNI 2
Commercial name
Extraction and filtration of welding fumes for non-heavy processes in the absence of oil and grease
Intended use
Machinery:
The Supply of Machinery (Safety) Regulations 2008.
EMC:
Electromagnetic Compatibility Regulations 2016.
LVD:
The Electrical Equipment (Safety) Regulations 2016.
RoHS:
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
S.I. 2008 No. 1597:
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
S.I. 2008 No. 1597:
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
S.I. 2008 No. 1597:
Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
S.I. 2008 No. 1597:
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
S.I. 2008 No. 1597:
Safety of machinery - Electrical equipment of machines - Part 1: General requirements.
UNI EN 21904-1:2020:
UNI EN 21904-2:2020:
The complete list of applied standards, guidelines and specifications are available at the Manufacturer.
Additional information: The declaration of conformity decays in case of non-compliant use and in the event of
configuration changes that have not been previously approved in writing by the Manufacturer.
Has been compiled, and is kept and available at the registered office of the company.
Place and date of the document
Legnaro,
Rev.: 0 – mis à jour le 09/04/2021
THE MANUFACTURER
DECLARES THAT THE PRODUCT
IS IN COMPLIANCE WITH THE FOLLOWING DIRECTIVES
The following harmonized standards have been applied
And exclusively for the model UNI 2 C-W3
Safety in Welding - Devices for the capture and separation of welding fumes - Part 1: General requirements
Safety in Welding - Devices for the capture and separation of welding fumes - Part 2: Test requirements
DECLARES THAT THE TECHNICAL FILE
| Sous réserve de modifications techniques et d'erreurs |
Manuel d'instructions pour l'utilisation et l'entretien - FR
35020
Postal code
Italy
Country
Year of manufacture
Legnaro
City
The Manufacturer
Marco Gallerino
Pag. 37 de 43
Publicité
