AirLive WL-5470POE Guide De Démarrage Rapide page 5

Important Information
The AP features 2 LAN ports.
TX output power is limited to 20dBm (EU) 23dBm (FCC) , up to 25dBm (South America)
The AP mode's default IP address is 192.168.100.252
The default Subnet Mask is 255.255.255.0
The default SSID is airlive
The default Channel is 11
The default login username is admin and no needed to enter the password, you can change the
password in the Web configuration page
In AP, Client, Bridge, and Repeater mode, the default DHCP Server is disabled. Please set your PC's
IP address to the same subnet as the AP to access the AP.
In WISP mode and WISP+Universal mode, the DHCP server is enabled. Please restart your PC to
renew the IP address.
Support of 8 modes of wireless functions : AP, Client, Bridge, WDS Repeater, Universal
Repeater, WISP(Client Router), WISP + Universal Repeater and Gateway (AP Router) mode
Note: If you setup the wireless mode and push the setup button, but can't pop-up window, please
disable the pop-up block function of the Yahoo or Google toolbar to allow pop-up window on your
browser.
GPL Compliance: Part of the device's firmware use GPL licensed code. There is no warranty for the
GPL software. You can get a copy of the GPL source code from our website a.
http://www.airlive.com/support/gpl_code.shtml.
All manuals and user guides at all-guides.com
WL-5470POE
English
3