Techno Line WS7049 Manuel page 8

Notes:

After 30 seconds without pressing any button, the clock switches
automatically from Set Mode to Normal Time Mode.

In 12 hour time display mode, the symbol "PM" is displayed for
afternoon hours.
°C/°F temperature display
The temperature is displayed either in °C or °F. Press the "SET" button to
switch between the °C or °F.
Hi/Lo temperature mode

In time display mode，press the "UP" button for about 3 seconds
to switch to Hi /Lo temperature mode.

In Hi/Lo temperature mode，press the "UP" button for about 3
seconds to switch to the time display mode.
Notes:

The value displayed under Hi is the maximum value measured by
the unit since the last initial operation or reset by removing
batteries. Lo is the minimum value measured during the same time.

Press and hold the "DOWN" button while in Hi /Lo temperature
mode to reset Hi/Lo memory.
IN/OUT temperature display
The indoor temperature or outdoor temperature is displayed on the LCD.
Press the "UP" button allows you to switch between the individual models:
outdoor above and indoor below / outdoor below and indoor above
EN3