Functions
Quartz clock with manual time setting.
Temperature alternatively in ℃ or ℉.
12/24 hour time display.
Thermometer:
Indoor measurement ranges: 0°C (32°F) ~ +50°C (122°F)
Outdoor measurement ranges: -40°C (-40°F) ~+ 70°C (158°F)
Display Low/Hi In/Outdoor Temperature
Battery: 1 x CR2032 (included).
Initial operation
Open the battery compartment on the rear side of the product and
insert a CR2032 battery (included). Pay attention to observe the
correct polarity. Close the battery compartment again.
When you insert the battery, all the icon on the LCD display will
briefly light up for 3 seconds.
Manual time setting
Press and hold "SET" for about 3 seconds and hour is flashing.
Press the "UP" or "DOWN" button to set the correct hour.
Press "SET" again to confirm your setting and the Minute is
flashing. Now use "UP" or "DOWN" buttons to set the correct
minute.
Press "SET" again to confirm and end your setting and to enter the
clock mode.
In time mode,press "DOWN" button to set the 12/24 hour time
display.
EN2