Publicité
Les langues disponibles
Les langues disponibles
• Do not allow high flames to develop under the extractor hood.
Do not flambé under extractor hoods. Both can lead to a fire
hazard and cause considerable consequential damage.
• Potential small black spherical particles in the packaging may
have originated from the high-performance carbon filter and
released during transport. These particles are harmless and
can be disposed of with domestic waste. Do not use these
particles for consumption. The functionality of the filter will not
be affected.
3
Description
INTENDED USE
The filter is intended to be used for filtering the air.
Do not use the filter for any other purpose than described in this document.
PLASMA FILTER
(Figure 1)
A
Plasma filter
B
Input (not included)
C
Connection (not included)
4
Installation
INSTALLING THE FILTER
1.
Make sure that the input of the filter is installed at the motor side of the extractor hood.
2.
Seal the connections.
3.
Connect the filter to the mains supply.
5
Operation
PREPARING FOR OPERATION
1.
For optimal room air cleaning, it is imperative for your induction hob with integrated extraction to be adequately
ventilated and adapted to the respective steam development.
2.
Make sure that you activate the integrated extraction 10 minutes before you start cooking.
COMPLETING OPERATION
1.
Make sure that the integrated extraction operates for 15 minutes after you finish cooking.
6
Technical data
PRODUCT FICHE
Item
Capacity
Features
D
Output (not included)
E
Grid (not included)
Specification
3
800 m
Suitable for all extractor hoods (new / pre-installed)
Cleaning the air and removing bad odours up to 98%
Long lifespan
Self cleaning
(Figure 2)
•
13
EN
Publicité
