hestan KBGIT Instructions D'utilisation

IMPORTANT - READ ALL INSTRUCTIONS BEFORE YOU BEGIN
THE INSTRUCTIONS HEREIN SHOULD BE PERFORMED BY A QUALIFIED SERVICE TECHNICIAN.
THE APPLIANCE MUST BE COMPLETELY COOL AND THE GAS SOURCE MUST BE SHUT OFF. THE
UNIT MUST BE UNPLUGGED FROM THE POWER OUTLET, OR THE ELECTRICAL BREAKER SHUT
OFF. YOU WILL NEED TO MOVE THE APPLIANCE AWAY FROM THE WALL FOR ACCESS.
SOME PARTS INSIDE YOUR APPLIANCE HAVE SHARP EDGES. CARE MUST BE TAKEN WHEN
HANDLING THE VARIOUS COMPONENTS TO AVOID PERSONAL INJURY. WEAR GLOVES WHEN
HANDLING.
TOOLS REQUIRED:
Work gloves
Safety glasses
Phillips screwdriver
5/16" & 3/8" deep socket wrench or nut driver
REMOVAL OF EXISTING BACKGUARD
1. Your Hestan appliance was shipped with an Island Trim Backguard (KBGIT) from the factory. From
the rear of the unit, remove screw (Item A), then remove the rear cover, then remove remaining
screws (Item C).
A
C
All manuals and user guides at all-guides.com
BACKGUARD
INSTALLATION
INSTRUCTIONS
KBGIT / KBGLB / KBGHS
IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED
EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING
PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.
Flammable Gas - disconnect all propane or natural gas supplies to this
unit before servicing.
Electrical Parts & Components – disconnect all power supplies before
servicing.
COVER
©2018 Hestan Commercial Corporation
EN
1