Publicité
Les langues disponibles
Les langues disponibles
Quick Reference DVR FIRENZE
6. Move the cursor on "BACKUP SPEED" and select the value of the backup rate from 1 (slow) to 9 (fast) using the
keys "+/-";
7. Move the cursor on "CAMERAS" to select the camera that you want to backup using the keys "+/-";
8. Move the cursor over the heading "YEAR", "MONTH", "DATE", "HOUR" and "MINUTE" to select the time and
date of end of backup using the keys "+/-";
9. Press the "COPY" to start the backup.
Throughout the backup process will receive an icon and a message indicating the progress of the procedure. Once the
procedure is necessary to disconnect the device acting on the appropriate menu:
1. Press the "MENU" button to access the system menu;
2. Move the cursor on "BACKUP DEVICE" and confirm by pressing "ENTER";
3. Move the cursor over the headings "USB DRIVE", "USB DVD" or "SD CARD" to select the type of connected
device and press "ENTER" to disconnect;
4. At this point you can physically disconnect the backup device from the DVR.
CAUTION: Do not re move the DVD until the backup process is not completely finished to prevent damage to the
optical drive.
CAUTION: Do not re move the USB device until the backup process is not completely finished.
5.3 Viewing the images:
During the backup the DVR creates two folders on the device, one containing the backup files and the other containing the
display of images (SelfPlayer). Follow the steps below to view images:
1. Connect the backup device used on a PC;
2. Start the software "Selfplayer" contained in the folder "SelfPlayer";
3. Press the "FILE" then "OPEN";
4. Select the file you want to display (in the folder "00001") and confirm with the button "OPEN".
The DVR backup splits the video into multiple files of maximum size of 100Mb which can subsequently be joined to form a
single file "avi" using the software "AVIConverter" provided.
Before turning off the DVR, press the "MENU" button and then "SHUTDOWN" and confirm by pressing "ENTER". Press
"ENTER" again to request for confirmation of the command. Only when the DVR displays the message "Shutdown complete.
Now you can turn off the system, you can turn off the DVR using the appropriate key on the back panel of the DVR.
7.1 Recording table:
All manuals and user guides at all-guides.com
6 Shut down:
7 Appendix:
34/141
Publicité
