Wetelux 82 14 52 Mode D'emploi page 14

stones in the pond and not directly onto the ground level of the
pond to avoid soiling of the capillary pin holes of the stone.
Notes:
The performance of the pump depends on the season and on the

position and orientation of the solar module. If there is too little
sunlight, the pump may not start. In this case please use a differ-
ent method to aerate the pond.
Keep the openings of the pump free from any obstructions. Do

not operate the pump under water.
Clean the aeration stone in regular intervals.

The surface of the solar module is made of glass. Be careful

when assembling the system. Do not break it. There is risk of
injury. A broken module cannot be repaired it has to be disposed
of environmentally compatible.
During the winter time store all components of the solar pond

aerator indoors at place that is protected from dust, dirt and ex-
treme temperatures. Clean all parts thoroughly before storing.
Cleaning the Solar Module
 Soiling on the front-side of the glass surface will reduce the
incidence of light onto the solar cells and this will decrease the
output of electrical power.
 In case of heavy soiling, clean the glass with usual glass clean-
ers. To avoid scratching the glass surface, use plenty of water
and a soft brush or a cloth.
 Check the electrical cables at regular intervals for any form of
damage or corrosion and for firm fit on the cable connections.
Operation
10